BT BF900 manual Press the Function button, Press 7 or Buttons to display

Models: BF900

1 63
Download 63 pages 20.75 Kb
Page 18
Image 18

Using the BF900

Speed dialling

You can store up to 100 numbers in the speed dial directory. (See page 23 on how to store speed dial numbers.)

SPEED-DIAL FUNCTION

Load the document.

Set the TYPE ORG, RESOLUTION and PHOTO settings if necessary.

Press the SPEED DIAL button.

Enter the 3-digit code (001-100) for the number you want to dial.

Press the ENTER button. The document is scanned and the number is dialled automatically.

Group dialling

You can have eight of the one-touch buttons as group dial buttons. These are buttons 25-32. Each of these buttons can hold up to 40 fax numbers, enabling you to send a fax to all of them just by pressing a single button. (See page 24 on how to store group dialling numbers.)

A

Load the document.

Set the TYPE ORG, RESOLUTION and PHOTO settings if necessary.

Press the ONE-TOUCHbutton you want which has been assigned as a group dial button.

The document is scanned and all the numbers in the group are dialled automatically in turn.

To set up a batch dial

You can set the ONE-TOUCH buttons to send faxes automatically at a pre-set time every day. This can be useful if you want to send faxes at times when call charges are lower or if you are faxing abroad to coincide with the other person’s office hours.

The one-touch buttons you select must have phone numbers stored already.

7

 

4

A

 

 

 

FUNCTION

ENTER

 

STOP

• Press the FUNCTION button.

• Press 7 (or the

buttons) to display

PROGRAM TEL.NO. 0~9,#,*,>, ENTER.

• Press the ENTER button.

 

• Press 4 (or the

buttons) to display

BATCH TX

1~5,>, ENTER.

 

Press the ENTER button.

Press the ONE-TOUCHbutton that you want to use as a batch dial.

Press the ENTER button. Display shows

START TIME=00:00, PRESS ENTER.

Use the keypad to set the time you want to start faxing.

Press the ENTER button to confirm. Display shows START TIME=XX:XX, DATA ENTRY OK and then BATCH TX. PRESS OT KEY.

You can now enter another one-touch button to set another batch dial, or press STOP to return to standby.

17

Page 18
Image 18
BT BF900 Press the Function button, Press 7 or Buttons to display, Press the Enter button Press 4 or Buttons to display