BT BF900 manual During transmission, Press the Stop button. Display shows, Either

To delete a batch dial

ENTER

•Follow the stops shown under ‘To set up a batch dial’ above and put in a START TIME of 00:00.

•Press the ENTER button to confirm.

Delayed sending

You can store a document in the memory and set a time for it to be sent later.

2

FUNCTIONENTER

Using the BF900

To stop a document being scanned

STOP

•Remove any unscanned sheets from the document feeder tray.

•Press the STOP button.

To stop a document being sent

During transmission:

1 0

STOPENTER

•Press the STOP button. Display shows

CANCEL=0. INTERRUPT=1.

• Load the document.

START

• Select the RESOLUTION, TYPE ORG and PHOTO settings if required.

• Press the FUNCTION button. Display shows

FUNCTION MODE 0~9,#,*,<,>.

• Press 2 (or the buttons) to display

DELAY TX 0~9,#,*,>, ENTER.

•Press the ENTER button. Display shows

TIME=00:00 PRESS ENTER.

•Set the time you want the fax to be sent using the 24-hour clock e.g., 8.15am=0815 and 6.30pm=1830. If you set an earlier time than the present, the fax will be sent the next day.

•Press the ENTER button. Display shows

DELAY TX. SEL. LOC/START.

•Enter the number – you can use the keypad, One-Touch button, Group Dial button or Speed Dial code. Display shows TEL=(NO)

PRESS START.

•Press the START button. The document is scanned and the display returns to standby.

Either

•Press 1 to postpone the current transmission and return to standby. The document will automatically be re-sent after 1 minute.

Or

•Press 0. Display shows the current session number DELETE SESS=xxx. PRESS ENTER.

•Press the ENTER button to delete the information or press the STOP button to exit and retain the information. Display shows

MEMORY TX. USER STOP and then returns to standby.

•An error report is printed confirming the transmission has been cancelled. This setting can be switched off. (See page38.)

18