![](/images/new-backgrounds/1184939/184939113x1.webp)
Technical information
Technical information
Choosing a location
Your BF900 should be kept clear of dust, moisture, high temperature and vibration and should not be exposed to direct sunlight. Don’t install it close to radiators or air conditioning outlets or in excessively warm, humid or dusty places.
Warning
The apparatus is only designed to be operated in a normal office or domestic environment where the relative humidity does not exceed 60%. It should not be used in bathrooms or near water.
Connecting to the UK network The BF900 is tested and approved for connection to the UK network, provided that it is used in accordance with the guidelines in this booklet.
Approval number
Approved for connection to telecommunication systems specified in instructions for use subject to conditions set out in them. CE compliant to 89/336/EEC (EMC Directive) and 73/28/EEC (low voltage directive).
Approved for use
This apparatus has been approved for use with the following facilities:
–storage of telephone/fax numbers for retrieval by
–automatic call initiation
–operation in the presence or absence of initial or secondary proceed indication
–automatic dialling facilities
–automatic storage of the last number dialled
–automatic repeat attempt facilities
–auto answer
–auto clear from the call originating end
–call progress monitor
–modem
–fax switch
–series connection facility
Any other usage will invalidate all the approval of the apparatus if, as a result, it then ceases to conform to the standards against which approval was granted.
56