BT BF900 manual To add a name, To add a net address

To add a name:

10

ENTERSTOP

•Press 1. Display shows NAME=A~Z, (UP ARROW), *, ENTER.

•Use the alphabet letters on the one-touch numbers to add a name.

•Press the ENTER button. Display shows

DATA ENTRY OK followed by NETWORK ADDRESS 0=(NO) 1=(YES).

If you press 0 the display shows SPEED DIAL. You can now enter another number or press STOP to return to standby.

To add a net address

1

ENTER STOP

•Press 1. Display shows NET ADDRS=PRESS ENTER.

•Use the keypad to enter the net address you want.

•Press the ENTER button. Display shows

DATA ENTRY OK followed by SPEED DIAL PRESS ENTER.

•You can now enter another number or press STOP to return to standby.

Using the BF900

To store numbers under a Group Dial button

You can set 8 of the One-Touch buttons as Group Dial buttons. These are buttons 25-32. Each one can hold up to 40 fax numbers.

Only fax numbers already stored as One-Touch or Speed Dial numbers can be entered under the Group Dial buttons.

7	3	A
FUNCTION	ENTER

0 1

SPEED-DIALSTOP

•Press the FUNCTION button. Display shows

FUNCTION MODE 0~9,#,*,<,>.

• Press 7 (or the buttons) to display

PROGRAM TEL. NO 0~9,#,*,>, ENTER.

•Press the ENTER button. Display shows

PROGRAM TEL NO. 1-5, <,>.

• Press 3 (or the arrows) to display

GROUP DIAL 1-5 ENTER.

•Press the ENTER button. Display shows

GROUP DIAL PRESS OT 25~32.

•Press the One-Touch button (25-32) that you want. Display shows *25+ <,>, ENTER.

•Press the ENTER button. Display shows

LOC. COUNTER=00. SEL. LOC/ENTER.

•Enter the phone numbers you want by pressing either a ONE-TOUCHbutton or the SPEED DIAL button then the 3 digit location code. If a name has been stored along with the number, both are displayed alternately.

•Press the ENTER button after selecting each fax number. The LOCATION COUNTER increases after each number is added.

24