Additional features
Activity report guide
Your guide to the details shown on an activity report.
TYPE DEPT SESS DATE/TIME DURATION
(a) (b) (c) (d)(e)
a) TYPE | Meaning |
MEMORY TX Document sent from memory.
DIRECT TX Document sent without scanning into memory.
MANUAL TX Document sent from number entered via the keypad.
GROUP TX Document sent via a Group Dial button.
POLLING TX Document polled from your BF900’s Bulletin Board.
POLLING RX Document polled by your BF900 from another machine.
RELAY RPT Document sent to another machine for further transmission.
AUTO RX Automatic reception mode.
MANUAL RX Manual reception mode.
B’CAT TX Document broadcast from memory.
RELAY INIT Relay initiate transmission.
RELAY BC Relay broadcast transmission.
RELAY RX Relay document received into the memory.
PCFAX TX Fax sent from a connected PC.
REMOTE ID SPEED PAGE RESULT
(f) | (g) | (h) | (I) |
b)DEPT. (Department number)
This is a two digit number which individual users (or groups of users) can have to identify them as the sender. Your BF900 lets you set up to 10 different department numbers. See page 33.
c)SESS (Session number)
A three digit reference number which is assigned automatically to each document.
d)DATE/TIME
Time at which each document began to be sent or received.
e)DURATION
Length of time it took to send or receive each document.
f)REMOTE ID
Identity of the machine your BF900 was connected to for sending or reception of documents. Your report shows one of four
types of ID:
1Name (if it corresponds with a name stored under a
2The Tel number of the other machine.
3Remote CSI.
4Blank – selected for security reasons.
36
