Cabletron Systems SEHI-32 manual Port Seg. Status, Enable Port, Disable Port, Update-Freq, Module

LOCAL MANAGEMENT

Port Seg. Status

Displays the segmentation status of the port selected. The two possible status messages are Segmented or Unsegmented. The SEHI and SEH automatically partition problem segments, and reconnect non-problem segments to the network.

Enable Port

This command lets you enable the selected port.

Disable Port

This command lets you Disable the selected port.

Update-Freq

This command lets you select the time interval between Stack/Module/ Port counter updates. You can choose update intervals in increments of 3 seconds, with the Maximum interval being 99 seconds.

Module

This command lets you view statistics for a selected module in the stack. The SEHI is Module 1 and each SEH in the stack follows in sequential order. Figure 6-9 shows each module number in the stack.

SEH - MODULE 5

SEH - MODULE 4

SEH - MODULE 3

SEH - MODULE 2

SEHI - MODULE 1

Figure 6-9. Module Number Sequence

Port

This command lets you view port statistics for ports 1-26 of the selected module.

Page 6-24