LOCAL MANAGEMENT
SNMP Community Name
Displays the community name to be included in the trap message, which is sent to the Network Management Station with the associated IP address.
Traps
Enables transmission of the traps to the network management station with the associated IP address.
Trap IP Address
Indicates the IP address of the workstation to receive trap alarms from the SEHI.
Configuring the Trap Table
1.Use the arrow keys to highlight the SNMP Community Name field, then enter the community name.
2.Press the Return key.
3.Use the arrow keys to highlight the Traps field and enter Y (or y) to send alarms from the SEHI to the workstation, or N (or n) to prevent alarms from being sent.
4.Press the Return key.
5.Use the arrow keys to highlight the appropriate Trap IP Address field.
6.Enter the IP address of the workstation that you want to send traps to in this field. The format for this entry is XXX.XXX.XXX.XXX, with the value of XXX ranging from 0 to 255, and three dots, or else it returns to the beginning of the field.
7.Use the arrow keys to highlight the SAVE option, then press the Return key or F6. The “SAVED OK” message appears indicating that the changes have been saved to memory.
Page
