CONNECTING TO THE NETWORK
Note: You must terminate each segment attached to the tee-connector. If you do not attach a segment to one of the female connections on the tee-connector, then a terminator must be placed on that connection.
c.Attach another thin-coax segment or a terminator to the other female connector on the tee-connector.
When internal termination switch is set to off (
):
Connect BNC tee-connector to port.
Attach a terminator or terminated thin-net segment to one female connector of tee-connector.
Connect a terminated thin-net
segment to other female connector
of tee-connector.
Attach thin-net segment directly to BNC connector when internal termination switch is set to on ( 
).
Figure 4-5. The EPIM-C
