Cabletron Systems SEHI-34, SEHI-22, SEHI-32 Exiting the Configuration Screen, Trap Table Screen

LOCAL MANAGEMENT

Exiting the Configuration Screen

1.To exit the Configuration screen, press the appropriate Function key. To return to the Feature Selection screen, use the arrow keys to highlight the RETURN command.

2.Press the Return key. The Feature Selection screen appears.

6.3.3The Trap Table Screen

To access the Trap Table screen from the Features Selection screen, use the arrow keys to highlight the Component Trap Table option, then press the Return key or F8. The Trap Table screen shown in Figure 6-6 appears.

SEHI LOCAL MANAGEMENT

Cabletron SEHI Revision X.XX.XX

TRAP TABLE

SNMP Community Name			Traps	IP Address
<CR>			N	0.0.0.0
<CR>			N	0.0.0.0
<CR>			N	0.0.0.0
<CR>			N	0.0.0.0
<CR>			N	0.0.0.0
<CR>			N	0.0.0.0
<CR>			N	0.0.0.0
<CR>			N	0.0.0.0
SAVE	COMMUNITY NAMES	IP TABLE	SNMP TOOLS	RETURN
F6	F7	F8	F9

Figure 6-6. Trap Table Screen

The Trap Table defines the management stations that will receive SNMP Traps for alarm/event notification. The following sections explain each field on the Trap Table screen and instructions on how to change them.

Page 6-14