Manuals / Canon / Computer Equipment / All in One Printer

Canon 2010F Two-Page Separation, Special, Copies, Press COPY, Copying Features, Original

Models: 2010F

1 106

Download 106 pages 12.48 Kb

Page 57

Two-Page Separation

Two-Page Separation

The Two-Page Separation mode enables you to copy facing pages in a book or a magazine to ﬁt onto separate sheets of paper.

3

Copying Features

Original

1

Copies

1

Special

IMPORTANT

•If the machine is operating in the Two-Page Separation mode, you cannot use the Hole Punch Erase, Image Combination, or Different Size Originals modes.

•Place your original on the platen glass. You cannot copy originals placed in the feeder using the Two-Page Separation mode.

•If you place your originals in the feeder, the selection <2-PAGE SEP> is grayed out.

•You can use only the original paper sizes shown on the LCD display.

•The Two-Page Separation mode cannot be used with free size paper.

COPY	1	Press [COPY].
		COPY lights.
Special Features	2	Place your original on the platen glass ➞ press [Special
	2	Place your original on the platen glass ➞ press [Special

Features].

If you want to make copies in page order, begin copying from the ﬁrst facing pages and work your way forward.

Place your original face down, so that its top edge is aligned with the top left corner of the platen glass by the arrow.

3-2Two-Page Separation

Image 57

Canon 2010F Two-Page Separation, Features, Place your original on the platen glass press Special, Copies, Press COPY

Contents

Copying Guide Please read this guide before operating this equipmentimageRUNNER 2010F Copying Guide Setting Up the Network Connection and Installing the CD-ROM Software Basic Operations Troubleshooting Copying InstructionsNetwork Connectivity and Setup Instructions PCL Printer Driver Installation and InstructionsChapter 3 Special Copying Features Chapter 4 Customizing Settings Chapter 1 Introduction to Copying Chapter 2 Basic Copying FeaturesHow This Manual Is Organized Chapter 5 AppendixChapter 2 Basic Copying Features ContentsCanceling a Copy Job Interrupt ModeChapter 4 Customizing Settings Chapter 3 Special Copying FeaturesTwo-Page Separation Margin Mode Frame Erase Using Shortcut KeysSymbols Used in This Manual How to Use This ManualKeys Used in This Manual PrefaceIllustrations Used in This Manual Trademarks Legal NoticesCopyright DisclaimersCHAPTER Introduction to CopyingSpecial Features Screen Copy Basic Features ScreenOverview of the imageRUNNER 2010F Introduction to CopyingIntroduction to Copying Additional Functions MenuFlow of Copy Operations 1 Press COPYIntroduction to Copying If the message ENTER DEPARTMENT ID AND PASSWORD appears If the message INSERT A CONTROL CARD appearsIntroduction to Copying 3 Set the desired copy mode on the Copy Basic Features screen 2 Place your originalIntroduction to Copying 4 Set the desired copy modes on the Special Features screen 5 Enter the copy quantity6 Press Start If you want to stop a copy job If you want to cancel a copy job in the standby modeIf you want to interrupt a copy job Introduction to Copying9 If the optional Card Reader-E1 is attached, remove the control card 8 When scanning is complete, remove your original10 If you have set Department ID Management, press ID Introduction to CopyingPlaten Glass Placing OriginalsFeeder Introduction to CopyingHorizontal Placement Vertical PlacementOrientation Platen Glass1 Lift up the feeder Platen Glass2 Place your original face down Introduction to Copying3 Gently lower the feeder 1-13Introduction to Copying 1 Neatly place your originals face up in the original supply tray Feeder ADF-J1Original Output Tray 2 Adjust the slide guides to ﬁt the size of your originals1-15 Introduction to CopyingUsing the Stop Key Canceling a Copy JobYou can cancel a copy job in several ways 1 Press Stop2 Press F2 or F3 to select the job to be canceled Using the System Monitor Screenpress F4 CANCEL You cannot select multiple jobs and cancel them all at onceReserving Copy Jobs While Printing Reserved Copying2 Place your original, and set the desired copy modes 3 Press Startmachine 4 When scanning is complete, remove the original from the1-19 Features2 Press Interrupt Interrupt Mode3 Place your original, and set the desired copy modes 1 Press COPY5 Once the original is scanned, remove it from the machine 4 Press Start1-21 Introduction to CopyingIntroduction to Copying 1-22 Interrupt ModeThis chapter describes the basic copying features Copy Quantity Basic Copying FeaturesCopy Exposure and Image Quality Adjustments CHAPTERBasic Copying Features 2 Enter the desired copy quantity 1 to 99 using the numericCopy Quantity Specifying the Required Number of CopiesBasic Copying Features 2 Enter the desired copy quantity 1 to 99 using the numericSYMBOLS keysAutomatic Paper Selection Paper SelectionThe machine automatically selects the copy paper Basic Copying FeaturesPress COPY Manual Paper Selection3 Make sure that AUTO PAPER is selected press OK Place your original press F2 PAPER SELECTPlace your original press F2 PAPER SELECT 3 Press F3 or F4 to select the desired paper sizeIf you want to use the stack bypass STACK BYPASS5 Press Start 4 Press OKBasic Copying Features Press F2 SELECT PAPERCopying Features Copy Exposure and Image Quality AdjustmentsText Mode Text/Photo ModeCopy Exposure Manual 3 Press F1 LIGHT or F3 DARK to adjust the exposurepress OK Place your original press F3 DENSITYText/Photo Mode Text ModePhoto Mode Image Quality Manual2-11 Copy Exposure and Image Quality AutomaticBasic Copying Features 4 Press StartTo cancel the automatic exposure control, press Features3 Press F2 AUTO EXPOSUR OK 4 Press StartChanging the Copy Zoom Ratio Preset ZoomZoom by Percentage Auto ZoomPlace your original press F1 COPY RATIO Preset ZoomReduce EnlargeZoom by Percentage 3 Press F3 REDUCE or F4 ENLARGE to select a presetreduction or enlargement ratio press OK Place your original press F1 COPY RATIO200%. Enter a value within the setting range 3 Set the copy ratio using the numeric keys press OKAuto Zoom correct value3 Press F1 COPY RATIO 2 Place your original press F2 PAPER SELECT specify the paper size4 Press F2 AUTO ZOOM OK CopyingOptional Units Collating CopiesCollate RotateIf the Rotate Mode Is Set If the Collate Mode Is SetOriginals ResultIf the Staple Mode Is Set If the Offset Mode Is SetPage Order Collate Place your originals press CollateIf you want to set the Rotate mode 3 Enter the desired copy quantity 1 to 99 using the numeric keysIf you want to set the Offset mode 2-21Page Order Staple 3 Enter the desired copy quantity 1 to 99 using the numericappears Place your original press Collate until STAPLE SORT2-23 Basic Copying Features4 Press Start 2-24 Collating Copies Basic Copying FeaturesCHAPTER Special Copying FeaturesTwo-Page Separation FeaturesSpecial Place your original on the platen glass press SpecialCover The Original Size setting menu appears3 Press F1 2-PAGE SEP Press F3 LEFT OPENING or F4 RGHT OPENING to selectSpecial Copying Features 6 Enter the desired copy quantity 1 to 99 using the numeric keys5 Press F4 ORIGNAL SIZE to select the paper size press OK 7 Press StartMargin Mode Place your original press Special FeaturesPress COPY 5 Press F3 - or F4 + to set the margin width 1 mm to 20 mm press OK 3 Press F2 MARGINpress 6 Enter the desired copy quantity 1 to 99 using the numericYES or Special Copying FeaturesCopy LTR Original Frame Erase Mode Not Selected Erase ModeFrame Erase Original Frame EraseBook Frame Erase Mode Not Selected Book Frame Erase Mode Original SelectedOriginal Frame Erase Book Frame EraseMake sure that FRAME ERASE is selected press OK 3 Press F3 FRAME ERASEPress F4 ORIGNAL SIZE to select the size of the original ORIGNAL SIZE, the next or previous menu option3-11 Book Frame Erase6 Enter the desired copy quantity 1 to 99 using the numeric Special Copying Features4 Press F3 BOOK FR ERS OK 2 Place your original on the platen glass press Special Featuresopened press OK 5 Press F4 ORIGNAL SIZE to select the size of the book whenThe selected mode is set, and the Copy Basic Features screen appears 7 Enter the desired copy quantity 1 to 99 using the numericThe default setting is ‘10 mm’ 6 Press F3 - or F4 + to set the desired book frame erase4 Press F4 HOLE/P ERASE OK Hole Punch EraseSpecial Copying Features Place your original press Special Features3-15 5 Press F4 ORIGNAL SIZE to select the size of the original press OKSpecial Copying Features Each time you pressSpecial Copying Features 7 Enter the desired copy quantity 1 to 99 using the numeric keys8 Press Start 3-16 Frame Erase2 on Image Combination3-17 Special Copying Features4 on Place your originals press Special FeaturesFeatures Press COPY4 Press F4 ORIGNAL SIZE to select the size of the original press OK 3 Press F4 LAYOUT COPY5 Press F2 2 ON 1 COMB or F3 4 on 1 to select the type of layout 3-19paper size press OK 6 Press F4 OPTIONS to select the layout order of the originals7 Press F2 STACK BYPASS, F3 , or F4 to select the If you selected 2 ON 1 COMB in step9 Press Start 8 Enter the desired copy quantity 1 to 99 using the numeric keys3-21 Special Copying FeaturesDifferent Size Originals 1 to 4 where you registered the Different Size Originalsmode Place your originals in the feeder press the Shortcut key3-23 3 Set the desired copy modesSpecial Copying Features 4 Press Start3-24 Different Size Originals Special Copying FeaturesCHAPTER Customizing SettingsCustomizing Settings Copy Settings TableAvailable Settings ApplicablePress F3 or F4 to highlight 02 COPY SETTINGS Changing the Current Standard SettingsImage Quality and Copy Exposure Press Additional Functions3 Press F3 or F4 to highlight 01 STD IMAGE QUAL 5 Press Reset to return to the Copy Basic Features screenEXP press OK 4 Set the desired standard copy image quality and exposure press OK2 Press F3 or F4 to highlight 02 STD ZOOM RATIO press OK Zoom Ratio4 Press Reset to return to the Copy Basic Features screen Copy Quantity2 Press F3 or F4 to highlight 03 STANDARD COPY QTY press OK Frame Erase Width Settings2 Press F3 or F4 to highlight 04 FRAME ERASE WIDTH press OK3 Press F2 - or F3 + to set the desired frame erase width Auto Sort01 mm to 20 mm press OK 4 Press Reset to return to the Copy Basic Features screen2 Press F3 or F4 to highlight 05 AUTO SORT Sort Rotate3 Press F3 or F4 to select 01 ON or 02 OFF If you want the machine to collate automatically, select 01 ON2 Press F3 or F4 to highlight 06 SORT ROTATE press OK 3 Press F3 or F4 to select 01 ON or 02 OFF press OK4 Press Reset to return to the Copy Basic Features screen Dull SharpnessSharp Dull Is Set4 Press Reset to return to the Copy Basic Features screen 2 Press F3 or F4 to highlight 08 SHARPNESS press OKPrescan highlight 02 COPY SETTINGS press OK2 Press F3 or F4 to highlight 09 PRESCAN press F4OK 3 Press F3 or F4 to select 01 ON or 02 OFFCustomizing Settings 4 Press Reset to return to the Copy Basic Features screen4-14 Changing the Current Standard Settings ResetAssigning Functions Using Shortcut Keys3 Press F3 or F4 to select a shortcut key press OK 2 Press F3 or F4 to highlight 07 SHORTCUT KEY SET press OK5 Press Reset to return to the Copy Basic Features screen Customizing Settings3 If necessary, specify the settings for each mode 4 that contains the copy mode you want to setSetting Making Copies4-18 Using Shortcut Keys Customizing SettingsAppendix This chapter provides the Combination of Functions Chart and indexCHAPTER Combination of Functions Chart AppendixFunction to Be Set Appendix Combination available Combination unavailableFunction to Be Set 5-4 Combination of Functions Chart AppendixFunction to Be Set Appendix Function to Be Set1 on Index NumericsAppendix Appendix Appendix Assigning Functions5-8 Index CANON U.S.A., INC CANON INCCANON CANADA INC CANON EUROPA N.V