F4

OK

F3

F4

OK

5 Press [F4] (ORIGNAL SIZE) to select the size of the original press [OK].

Each time you press

F4

(ORIGNAL SIZE), the next or previous menu option

 

becomes highlighted.

The Frame Erase Width setting menu appears.

NOTE

You can set the Hole Punch Erase mode only for the original sizes shown on the LCD display.

The machine automatically selects the copy paper size according to the original size you set. <AUTO PAPER> is displayed; however, you can also select the paper size manually.

6 Press [F3] (–) or [F4] (+) to set the desired hole punch erase width (3 mm to 20 mm) press [OK].

You can also use the numeric keys to enter the hole punch erase width, and C (Clear) to clear the value.

If you enter a value outside the setting range, an error tone sounds. Enter a value within the setting range.

The selected mode is set, and the Copy Basic Features screen appears.

NOTE

The default setting is ‘18 mm’.

3

Special Copying Features

Frame Erase

3-15

Page 70
Image 70
Canon 2010F manual Each time you press