Zoom Ratio | Canon 2010F guide

Zoom Ratio

This setting enables you to set the standard copy (zoom) ratio.

NOTE

The default setting is ‘100%’.

Additional Functions

F3

F4

OK

F3

F4

OK

F2

F3

OK

1 Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to highlight <02 COPY SETTINGS> ➞ press [OK].

The COPY SETTINGS menu appears.

2 Press [F3] (▼) or [F4] (▲) to highlight <02 STD ZOOM RATIO>

➞press [OK].

Each time you press	F3	(▼) or	F4	(▲), the next or previous menu option

becomes highlighted.

The STD ZOOM RATIO menu appears.

3 Press [F2] (–) or [F3] (+) to set the desired standard zoom ratio (50% to 200%) ➞ press [OK].

You can also use the numeric keys to enter the standard zoom ratio, and C (Clear) to clear the value.

If you enter a value outside the setting range, an error tone sounds. Enter a value within the setting range.

4

Customizing Settings

The selected mode is set, and the display returns to the COPY SETTINGS menu.

Changing the Current Standard Settings

4-5

Image 84

Canon 2010F manual Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK

Contents

Copying Guide ImageRUNNER 2010F Copying Guide Manuals for the Machine How This Manual Is Organized Appendix Contents Special Copying Features Customizing SettingsAppendix How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Illustrations Used in This Manual Vii Legal Notices TrademarksCopyright Disclaimers Introduction to Copying Copy Basic Features Screen Special Features ScreenOverview of the imageRUNNER 2010F Additional Functions Menu Flow of Copy Operations Press Copy If the message Enter Department ID and Password appears If the message Insert a Control Card appears Set the desired copy mode on the Copy Basic Features screen Place your original Set the desired copy modes on the Special Features screen Enter the copy quantityPress Start If you want to cancel a copy job in the standby mode If you want to stop a copy jobIf you want to interrupt a copy job If you have set Department ID Management, press ID Placing Originals Platen GlassFeeder Vertical Placement Horizontal Placement Feeder Vertical PlacementOrientation Platen Glass Platen Glass Lift up the feederPlace your original face down Gently lower the feeder Feeder ADF-J1 Adjust the slide guides to ﬁt the size of your originals Original Output Tray Canceling a Copy Job Using the Stop KeyPress Stop If only one copy job is being processed Using the System Monitor Screen You cannot select multiple jobs and cancel them all at oncePress Monitor Press F3 YES Reserved Copying Reserving Copy Jobs While PrintingPlace your original, and set the desired copy modes Copy lights When scanning is complete, remove the original from Machine Interrupt Mode Press Interrupt Once the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Copy Quantity Specifying the Required Number of CopiesChanging the Copy Quantity Copy Quantity Paper Selection Automatic Paper Selection Manual Paper Selection Make sure that Auto Paper is selected press OK Press F3 or F4 to select the desired paper size If you want to use the stack bypass Press OK Text Mode Text/Photo Mode Copy Exposure ManualImage Quality Manual Copy Exposure and Image Quality Automatic Press F1 Light or F3 Dark to adjust the exposure Copy Exposure ManualPress Light or Text Mode Text/Photo ModePhoto Mode Image Quality Manual Copy Exposure and Image Quality Automatic To cancel the automatic exposure control, press Press F2 Auto Exposur OK Preset Zoom Changing the Copy Zoom RatioZoom by Percentage Auto Zoom Preset Zoom ReduceEnlarge Press F3 Reduce or F4 Enlarge to select a preset Zoom by PercentageReduction or enlargement ratio press OK Each time you press Set the copy ratio using the numeric keys press OK 200%. Enter a value within the setting rangeAuto Zoom Correct value Press F1 Copy Ratio Press F2 Auto Zoom OK Collating Copies Optional Units Collate Rotate Offset Staple*1 If the Collate Mode Is Set If the Rotate Mode Is SetOriginals Set Result If the Offset Mode Is Set If the Staple Mode Is SetOrder Collate Place your originals press Collate If you want to set the Rotate mode If you want to set the Offset mode Order Staple AppearsLights Number of Copies, on p Press Start 24Collating Copies Special Copying Features Features Two-Page SeparationPlace your original on the platen glass press Special Original Size setting menu appears Direction that the book opens press OKSpecial Press F4 Orignal Size to select the paper size press OK Margin Mode Place your original press Special FeaturesOriginal Left Margin Selected Right Margin Top Margin Bottom Margin Selected Selected 6Margin Mode Press YES or Frame Erase Original Frame Erase Book Frame Erase Mode Original Selected Copy Not Selected Original Frame EraseBook Frame Erase Hole Punch Erase Press F4 Orignal Size to select the size of the original Book Frame Erase Press F3 Frame Erase Press F3 Book FR ERS OK Opened press OK Default setting is ‘10 mm’ Press F3 or F4 + to set the desired book frame eraseWidth 3 mm to 50 mm for the center line press OK Clear to clear the value Hole Punch Erase Press F3 Frame Erase Press F4 HOLE/P Erase OK Each time you press 16Frame Erase Original Vertical Placement Copy Image Combination Place your originals press Special Features Copying Special Becomes highlighted Copy Layout setting menu appears Paper size press OK If you selected 2 on 1 Comb in stepIf you selected 4 on 1 in step Press Start To 4 where you registered the Different Size Originals Different Size OriginalsMode Place your originals in the feeder press the Shortcut key Set the desired copy modes 24Different Size Originals Customizing Settings Copy Settings Table Available Settings Applicable Changing the Current Standard Settings Image Quality and Copy ExposurePress Additional Functions Press Reset to return to the Copy Basic Features screen Press F3 or F4 to highlight 01 STD Image QualEXP press OK Zoom Ratio Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Copy Quantity Press F3 or F4 to highlight 03 Standard Copy QTY press OK Frame Erase Width Press F3 or F4 to highlight 04 Frame EraseWidth press OK Auto Sort Press F2 or F3 + to set the desired frame erase widthMm to 20 mm press OK Sort Rotate Press F3 or F4 to highlight 05 Auto Sort Press OKPress F3 or F4 to select 01 on or 02 OFF Press OK Press F3 or F4 to highlight 06 Sort Rotate press OK Sharpness DullSharp Original Copy Dull Is Set Dull Is Not Set Press F3 or F4 to highlight 08 Sharpness press OK Prescan Press F3 or F4 to highlight 09 Prescan press F4OKIf you want to use the prescan function, select 01 on 14Changing the Current Standard Settings Using Shortcut Keys Assigning Functions Press F3 or F4 to highlight 07 Shortcut KEY SET press OK Press F3 or F4 to select a shortcut key press OK That contains the copy mode you want to set If necessary, specify the settings for each modeSetting Applicable Making Copies 18Using Shortcut Keys Appendix Combination of Functions Chart Function to Be Set Combination available Combination unavailable 4Combination of Functions Chart Originals Size Different Index Numerics Index Making Copies Canon Deutschland GmbH Canon Italia S.p.A