1
Introduction to Copying
Stop
F3
Stop
F2
F3
F4
Interrupt
NOTE
If there is a current job, the machine scans the original, and waits to print it. Printing starts when the current job is complete.
7 If you want to stop, interrupt, or copy another original during a copy job, follow the instruction below.
●If you want to stop a copy job:
❑ Press [Stop].
❑Press [F3] (YES).
●If you want to cancel a copy job in the standby mode:
❑Press [Stop].
❑Press [F2] (▼) or [F3] (▲) to select the copy job you want to cancel ➞ press [F4] (CANCEL).
NOTE
•After pressing 
(Stop), several copies may continue to print out.
•You can also cancel a copy job from the System Monitor screen. (See “Using the System Monitor Screen,” on p.
●If you want to interrupt a copy job:
❑To interrupt a copy job when you need to make priority copies, press [Interrupt]. For instructions on interrupting a copy job, see “Interrupt Mode,” on p.
The message <ABLE TO PERFORM INTERRUPT JOB> appears on the LCD display.
