Canon CDI-E019-010 manual Click the Open Camera button

44

4.Click [Get Photo] from the icons that display and select [Cameras].

5.Click the [1 Camera] tab.

In the [Camera Models] option, confirm that [Canon XXX USB] (XXX will be replaced by your camera model name) or [Canon Digital Camera RS-232C] is selected. If several models are listed, select the one that corresponds to your camera.

6.Click the [Open Camera] button.

The TWAIN driver will start. Use it to load images. (➜ p. 46)

Connecting the Camera to a Serial Interface

1.Attach the camera to the computer with the serial cable.

Refer to Where to Find Instructions for Attaching Your Camera to a Computer (➜ p. ii) for connection instructions.

2.Set the camera to the mode for communicating with a computer.

3.Start Adobe PhotoDeluxe Home Edition.

4.Click [Get & Fix Photo] at the upper left of the window.

5.Click [Get Photo] from the icons that display and select [Cameras].

6.Click the [1 Camera] tab.

In the [Camera Models] option, confirm that [Canon Digital Camera RS-232C] is selected.

7.Click the [Open Camera] button. The TWAIN driver will start.

8.Click the [Communication Settings] button.

9.Set the port type, port name and baud rate (transfer speed) settings and click the [OK] button.

For instructions on the communication settings, please refer to page 102.

For downloading instructions, please see Loading Images (➜ p. 47).