Canon IR2220I, IR3320N manual Copy Functions

(Transparency Interleaving)

Making Copies with Sheets of Paper Interleaved Between Transparencies

Use this mode when copying onto transparencies fed from the stack bypass. The machine automatically interleaves a sheet of paper between each transparency. The interleaf sheets protect the copied surface of the transparencies. They can also be printed with the same images as the transparencies or left blank.

IMPORTANT

•When the machine is operating in the Transparency Interleaving mode, you cannot use the Remote or Cascade copy, Finisher, Two-Sided, Two-Page Separation, Cover/Sheet Insertion, Image Combination, Image Separation, Booklet, Image Repeat, Mirror Image, Form Composition, and Page Numbering modes.

•You cannot make more than one set of copies at a time in the Transparency Interleaving mode.

•Even if your machine is equipped with the Finisher, you cannot use any of the Finisher modes with the Transparency Interleaving mode.

NOTE

•The machine’s counter does not count blank interleaf sheets as copies.

•Transparencies are output into Tray A when only Inner 2way Tray-A1 is attached, and into Tray B in the case of Saddle Finisher-G1, even if the other tray is specified as a designated tray.

■Blank Interleaf Sheets Selected in the Transparency Interleaving Mode:

Outputs a printed transparency and a blank interleaf sheet alternately.

2

Copy Functions

Originals

Blank Interleaf

Sheets

Copies

Transparencies

Additional

Making Copies with Sheets of Paper Interleaved Between Transparencies (Transparency Interleaving) 2-17