Canon IR2220I, IR3320N manual Setting Automatic Collate, Select On or Off, and press OK

Setting Automatic Collate

This function automatically selects the Collate (Offset Collate) mode when the original is placed in the feeder. This is helpful when making multiple copies, because the user does not need to remember to select the Finisher mode.

NOTE

•When Auto Collate is set to ‘On’ and you set the originals on the feeder, the collate mode is automatically selected as listed below.

-[Offset Collate]: When Finisher-J1 is attached or Saddle Finisher-G1 is attached (Tray A exit slot is selected)

-[Collate]: When Saddle Finisher-G1 is attached (Tray A exit slot is not selected), only Inner 2way Tray-A1 is attached, Copy Tray-F1 is attached, or Finisher is attached

•The default setting is ‘On.’

1Call up the desired screen as follows:

➔ [Copy Settings] ➔ [Auto Collate]

2Select [On] or [Off], and press [OK].

The specified mode is set.

3 Press [Done] repeatedly until the Basic Features screen appears.

3

Setting/Storing Specifications of the Copy Function

Setting Automatic Collate 3-5