If you select [Adjust Each Dim.], press [Top], [Left], [Center], [Right], and [Bottom] to set the frame width to erase by using
When entering values in millimetres, you can use 
- 
(numeric keys) and 
to clear your entries.
If you enter the value with 
- 
(numeric keys), you can change the entered value by pressing
The screen for the next step is displayed.
If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.
NOTE
•If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the Additional Functions beforehand. (See Chapter 3, “Selecting and Storing Settings to Suit Your Needs,” in the Reference Guide.)
•The default settings are ‘10 mm’ for [Center], and ‘4 mm’ for [Top], [Left], [Right], [Bottom], and [Sides]. The maximum frame erase width area is ‘50 mm.’
2
Additional Copy Functions
Erasing Shadows and Frame Lines from Copies (Frame Erase)
