Canon IR2220I, IR3320N manual Additional Copy Functions

2 Press [Binding Erase] and designate the area of the binding holes on the original.

The position of the binding holes refers not to the position in which the original is placed on the platen glass, but to the position of the binding holes when the surface of the original that you want to scan is viewed as face up, with the top edge at the top.

3 Set the width of the binding erase by pressing [–] or [+], and press [OK] ➔ [Done] in this order.

2

Additional Copy Functions

When entering values in millimetres, you can use - (numeric keys) and .

If you enter the value with - (numeric keys), you can change the entered value by pressing [–] or [+].

The specified mode is set, and the display returns to the Basic Features screen.

If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.

Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-37