1
Basic Copying
3
4
NOTE
•It is impossible to choose two different machines other than your own for cascade copying. You must include your own machine as one of the output devices.
•If Error Recovery for Cascade Copy is set to ‘On’, the remaining copy job is not processed in the following cases:
-The machine is scanning originals for the Cascade Copy mode.
-The Cascade Copy mode is used in combination with the Cover/Sheet Insertion mode.
-The Cascade Copy mode is used in combination with the Different Size Originals, Auto Paper Selection, and
-The normally operating printer has completed the cascade copy job.
-An error occurs in the normally operating printer.
-The cascade copy job has almost finished.
-The number of copies is less than six.
•If Error Recovery for Cascade Copy is set to ‘On’, a machine in which an error occurs cannot resume the remaining copy job even when the machine is recovered after the copy job is reassigned.
From the Basic Features screen, select the copy settings.
NOTE
•When you use a remote copy printer, only those copy settings supported by the selected remote copy printer are available.
•When cascade copying, you cannot select copy settings that are not supported by the selected remote copy printer. Also, if you select a remote copy printer equipped with a different finisher, you cannot select settings other than Collate and Group, even if the remote copy printer supports the specified Copy mode.
Press 
.
Copying starts.
NOTE
•For instructions on how to cancel a remote copy or cascade copy job, see Chapter 2, “Checking Various Job Operations and Device Status,” in the Reference Guide.
