●When you select [Rotate]:
Press [Next] and select [Auto] or [A4], [A4R], [A5], or [A5R] paper. Then press [OK].
1
Basic Copying
Only press [OK] if:
-The available paper size is selected manually
-The available paper size is loaded in both the horizontal and vertical directions
-Drawer Eligibility for APS/ADS for the paper drawers loaded with the available paper size is set to ‘On.’ (See Chapter 3, “Selecting and Storing Settings to Suit Your Needs,” in the Reference Guide.)
The specified mode is set, and the display returns to the Basic Features screen.
IMPORTANT
•If you select [Auto] after selecting Rotate, make sure you select a paper size that can be rotated. If you do not, the paper might not be rotated and collated. A4, A4R, B5, B5R, A5 and A5R papers can be rotated.
•If the papersize that cannot be rotated is selected, or the rotatable paper is ran out, the output are collated.
3 Press 
.
When the original is placed on the platen glass, follow the instructions that appear on the touch panel display. Press 
one time for each original. When scanning is complete, press [Done].
Copying starts.
NOTE
•To cancel this setting, press [Finisher] ➔ [Cancel] in this order.
•To cancel all settings and return the machine to the Standard mode, press 
.
