Canon IR2220I, IR3320N manual Additional

(Image Separation)

Dividing an Original Into Equal Sections and Enlarging Each Section on a Separate Copy Sheet

This mode automatically divides an original into equal sections, and copies each section in an enlarged form on a separate sheet.

The following two Image Separation features are available: 1 to 2 (1-sided and 2-sided copies), and 1 to 4 (1-sided and 2-sided copies).

IMPORTANT

•When the machine is operating in the Image Separation mode, you cannot use the Entire Image, Saddle Stitch, Two-Sided, Two-Page Separation, Cover/Sheet Insertion, Image Combination, Shift (No. Key Entry), Booklet, Transparency Interleaving, Different Size Originals, Frame Erase, Image Repeat, and Form Composition modes.

•If you use the Remote Copying or Cascade Copying mode while the machine is operating in Image Separation mode, you cannot set a pattern for the last page of the original.

•Originals copied using the Image Separation mode must all be the same size. You cannot use the Different Size Originals mode in combination with the Image Separation mode.

•Place the original on the platen glass. You cannot copy an original in the Image Separation mode from the feeder.

NOTE

•The enlargement ratio is automatically set to match the designated paper size.

■1 To 2

Divides a one-sided original into two equal sections, and outputs the sections in an enlarged form as two, 1-sided copies or one, 2-sided copy.

2

Copy Functions

Original

1 2

1

2

Copies

or

1

Additional

NOTE

•You can place A4-size originals horizontally or vertically when using this feature. When placed vertically, each page is divided into upper and lower sections.

Dividing an Original Into Equal Sections and Enlarging Each Section on a Separate Copy Sheet (Image	2-45
Separation)