nIf you are attempting to reinstall the Desktop Manager software, you must first uninstall your current installation of the software. For instructions on uninstalling the software, refer to Chapter 8, “L60 Setup and Other Utilities in the Desktop Manager.”
Installing in Windows
To install the software for your L60, you need to run the MultiPASSTM Master Installer Program on your Canon Desktop Manager
❏Method #1: AutoRun. You load the Canon Desktop Manager CD- ROM and follow the instructions it displays.
❏Method #2: Manual. You run the software’s setup program manually, from within Windows.
We recommend using Method #1. However, a few computers may not be configured to use Windows’ AutoRun feature. In this case, use Method #2 instead. No matter which method you choose to get started, once the setup programs begin, they’ll run the same way, giving you the same options.
nWhen you turn on your computer, Windows might display the “New Hardware Found” dialog box, and then ask where it should look for your printer driver software. If this happens, click Cancel. Then, follow one of the two installation methods described below.
Method #1: AutoRunBegin the installation process by simply inserting your MultiPASSTM Desktop manager CD in your
Chapter 2 |