Paper Is Not Loading Correctly.

❏Does paper not load into the unit?

The multi-purpose tray might contain too many sheets or paper might not be inserted all the way into the multi-purpose tray.

❏Does paper not feed through one sheet at a time?

Be sure to fan the stack of paper before placing it in the multi-purpose tray. Make sure the stack of paper does not exceed the paper limit mark.

❏Does paper not feed through the automatic document feeder?

If paper jams in the automatic document feeder, open the operation panel and remove the document gently; then close the operation panel.

❏Is an envelope not loading correctly?

Make sure you do not stack more than 7 envelopes in the multi-purpose tray.

The Print Quality Is Not Satisfactory.

❏Are some of the characters not printing?

If characters are not printing, check the parallel cable is securely plugged in at both ends; make sure your parallel cable is less than 6.6' (2m). Check your application’s print setup to make sure Canon MultiPASS L60 Printer is selected as the printer.

❏Do characters not fit on the page?

Make sure paper is aligned correctly in the sheet feeder. Check that margins and paper size are set correctly in your printing application.

❏Is printing not clear?

Check to see if you are printing using the Draft print quality option.

FrequentlyAsked

Questions

 

 

Chapter 9

Frequently Asked Questions 9-7