3-23
CHAPTER 3. REPAIR INSTRUCTION
3.3.4 Starting up the Adjustment Software
After completing the preparatory steps, click Start and move the cursor to Program; then select Canon
Digital Camera and click PowerShot S230/DIGITAL IXUS V3 Adjustment.
3.3.5 Menu Window
When the Adjustment Software starts up, the Menu Window below will appear.
3.3.6 How to Use the Adjustment Software
Calibration/Adjustment
For starting, click the button related with adjustment.
* Whenever you use your light source for the adjustment for the first time, be sure to click the “Cali-
bration” Button.
Quitting the Adjustment Software
Click the “Exit” button.
Saving or Loading data
• “Save” button : This button saves all adjustment data stored on the camera in text format.
• “Load” button: This button loads all adjustment data saved in text format to the camera.
Saving or Loading data
• “Save” button : This button saves all adjustment data stored on the camera in text format.
• “Load” button: This button loads all adjustment data saved in text format to the camera.
Notes
• If the adjustment fails, a message indicating the failure will appear on each product. If this happens,
do the adjustment again.
• The Adjustment Software is dedicated only to Canon Digital Camera PowerShot S45.
Never use it for any other camera.
• The Windows98 or 2000 must be pre-installed on the computer that is equipped with the USB
terminal. (Windows95 does not support the USB.)
* The operation with the Windows XP, etc. is not guaranteed.