Casio FX-9750G, FX-9860GII IUsing the Clipboard for Copy and Paste, STo cut the text, STo specify the copy range

U

Press ).

Cursor is positioned automatically at the location of the cause of the error.

Make necessary changes.

B@

Execute again.

U

IUsing the Clipboard for Copy and Paste

You can copy (or cut) a function, command, or other input to the clipboard, and then paste the clipboard contents at another location.

•The procedures described here all use the Linear input/output mode. For details about the copy and paste operation while the Math input/output mode is selected, see “Using the Clipboard for Copy and Paste in the Math Input/Output Mode” (page 1-18).

STo specify the copy range

1.Move the cursor (I) to the beginning or end of the range of text you want to copy and then press G(CLIP). This changes the cursor to “”.

2.Use the cursor keys to move the cursor and highlight the range of text you want to copy.

3.Press (COPY) to copy the highlighted text to the clipboard, and exit the copy range specification mode.

The selected characters are not changed when you copy them.

To cancel text highlighting without performing a copy operation, press ).

STo cut the text

1.Move the cursor (I) to the beginning or end of the range of text you want to cut and then press G(CLIP). This changes the cursor to “”.

1-8