Casio FX-9750G, FX-9860GII IExample of Statistical Calculation Operation (CALC Menu), Item, Description, If you select this, number of columns:

•The number of columns you select in step 1 will determine what information is input automatically on the general graph settings screen.

If you select this	This information will be input automatically:
number of columns:
1	XCellRange
2	XCellRange, YCellRange
3	XCellRange, YCellRange, Frequency

• The following describes each of the setting items for this screen.

Item	Description
StatGraph1	Select the name of the setup you want. You can have up to three
	different setups registered, named StatGraph 1, 2, or 3.
Graph Type	Select the graph type. The initial default setting is Scat (scatter plot).
XCellRange	Specifies the cell range assigned to the graph x-axis (XCellRange).
	Only XCellRange is displayed for some Graph Types.
YCellRange	Specifies the cell range assigned to the graph y-axis (YCellRange).
	The YCellRange is not displayed for some Graph Types.
Frequency	Specifies the range cells that contain values indicating the frequency
	of each graph data item. Select (1) if you do not want to use
	frequency values.
Mark Type	Specify the type of mark (U, σ, or •) to use as the mark on the scatter
	plot.

3.Use Dand Ato move the highlighting to the setting item you want to change. On the function menu that appears, select the setting you want.

•For details about the StatGraph1, Graph Type, and Mark Type settings, see “To display the general graph settings screen” (page 6-2).

•If you want to change the XCellRange, YCellRange, or Frequency setting, move the highlighting to the item you want to change and then input the cell range directly, or select (CELL) ((CELL) for Frequency) and then edit the currently input range. When inputting a cell range manually, use (:) to enter a colon (:) between two cells that define the range.

4.After configuring the required settings, press )or U.

IExample of Statistical Calculation Operation (CALC Menu)

This example uses the data from the “Drawing a Scatter Diagram and xy Line Graph” (page 6-9) to perform paired-variable statistical calculations.

0.5, 1.2, 2.4, 4.0, 5.2 (x-data)

–2.1, 0.3, 1.5, 2.0, 2.4 (y-data)

9-17