Casio FX-9750G, FX-9860GII IConfiguring the Receiver’s Wakeup Feature, STo execute a send operation, fx-7400GII, Sending Unit, Receiving Unit, All models except fx-7400GII

Only items that contain data appear on the data item selection screen. If there are too many data items to fit on a single screen, the list scrolls when you move the cursor to the bottom line of the items on the screen.

STo execute a send operation

After selecting the data items to send, press (TRAN). A message appears to confirm that you want to execute the send operation.

•(Yes) ... sends data

•(No) ... returns to data selection screen

Press (Yes) to send the data.

• You can interrupt a data operation at any time by pressing .

The following shows what the displays of the sending and receiving units look like after the data communication operation is complete.

Sending Unit Receiving Unit

Press )to return to the data communication main menu.

IConfiguring the Receiver’s Wakeup Feature

When Wakeup is turned on the receiver, the receiver turns on automatically when data transfer starts.

fx-7400GII

• The receiver enters the receive mode automatically after it wakes up.

All models except fx-7400GII

•When communicating between two calculators (3PIN selected as the cable type), the receiver enters the receive mode automatically after it wakes up.

•When communication is with a computer (USB selected as the cable type), connecting the USB cable to a computer and then to the calculator (while the calculator is turned off) will cause the calculator to turn on and the “Select Connection Mode” dialog box to appear.

13-4