3-5

Using Advanced Setup

kSample Setup

The Sample Setup screen lets you configure a number of settings that control sampling.

u To configure Sample Setup settings

1.While the Advanced Setup menu (page 3-1) is on the display, press c(Sample).

•This displays the Sample Setup screen, with the “Mode” line highlighted, which indicates that you can select the sampling mode.

2. Select the sampling mode that suits the type of sampling you want to perform.

To do this:

Press this

To select

key:

this mode:

 

 

 

 

Graph data in real-time as it is sampled

1(R-T)

Realtime

 

 

 

Perform sampling of high-speed phenomena (sound, etc.)

2(Fast)

Fast

 

 

 

Perform sampling over a long time (weather, etc.)

 

 

• The EA-200 enters a power off sleep state while standing

4(Extd)

Extended

by.

 

 

 

 

 

Sample sound using the EA-200’s built-in microphone

6(g)

Sound

1(Snd)

 

 

 

 

 

Record the time of the occurrence of a particular trigger

6(g)

 

event as an absolute value starting from 0, which is the

Clock

2(Clck)

sampling start time

 

 

 

 

 

 

Perform periodic sampling, from a start trigger event to an

6(g)

Period

end trigger event

3(Priod)

 

 

 

 

Perform sampling other than that described above

3(Norm)

Normal

 

 

 

• Note that the mode you select also determines the channel(s) you can use.

Sampling mode:

Selectable Channel(s)

 

 

Realtime, Extended, Normal

CH1, CH2, CH3, SONIC

 

 

Fast

CH1, Mic

 

 

Sound

Mic

 

 

Clock, Period

CH1

 

 

20051101