7-3

Using Program Converter

5.If you plan to use a custom probe connected to CH1 of the Data Analyzer, specify whether calibration or zero adjust should be performed. Perform one of the following key operations to configure the desired setting.

To perform this operation:

Perform this key operation:

 

 

Calibration of the CH1 custom probe

3(CALB) 1(CALIB)

 

 

Zero adjust of the CH1 custom probe

3(CALB) 2(ZERO)

 

 

No calibration

3(CALB) 3(None)

 

 

The operation you specify will appear in line “F3:” of the program converter screen.

6.To password protect the program, press 4().

This will cause the “Password?” prompt and password input field to appear under the program name input field.

7.Enter up to eight characters for the password.

If you change your mind about assigning a password, press J here. This will cause the password input field to disappear and cancel password input.

8.After everything is the way you want, press w to convert the program in accordance with the setup.

The message “Complete!” appears when conversion is complete. To clear the message and return to the screen that was on the display in step 1, press w or J.

20070101