2-10

Using the Setup Wizard

14. Perform one of the following operations, depending on what you want to do.

To change the output frequency and try again:

Press 1(Yes) to return to the “Output Frequency” dialog box. Next, repeat the above steps from step 10.

To change the output range of the waveform graph and try again:

Press 6(No) to return to the graph screen in step 7. Next, repeat the above steps from step 8.

To change the function:

Press 6(No) and then J to return to the graph function list in step 6. Next, repeat the above steps from step 6.

To exit the procedure and return to the E-CON2 main menu:

Press 6(No) and then press J twice.

20051101