7-2

Using Program Converter

2.Enter up to eight characters for the program name.

Note

Using the program converter initial default settings will create a program like the one below.

•Associated Scientific Calculator: fx-9860 Series

•Associated Data Analyzer: EA-200

•Calibration: None

•Password: None

If you want to use these settings the way they are without changing them, skip steps 3 through 7 and go directly to step 8. If you want to change any of the settings, perform the applicable operations in steps 3 through 7.

3.Specify the scientific calculator model to be associated with the program. Perform one of the following key operations to associate the program with a scientific calculator.

To associate the program with this calculator:

Perform this key operation:

 

 

fx-9860 Series

1(CALC) 1(9860)

 

 

CFX-9850 Series

1(CALC) 2(9850)

 

 

fx-7400 Series

1(CALC) 3(7400)

 

 

•The number part of the scientific calculator model number you specify will appear in line “F1:” of the program converter screen.

Note

For information about 1(CALC)4(→38K), see “Converting a CFX-9850 Series Program to a fx-9860 Series Compatible Program” (page 7-4).

4.Specify the Data Analyzer model (EA-100 or EA-200) to be associated with the program. Perform one of the following key operations to associate the program with a Data Analyzer.

To associate the program with this Data Analyzer:

Perform this key operation:

 

 

EA-200

2(TYPE) 1(200)

 

 

EA-100

2(TYPE) 2(100)

 

 

•The number part of the Data Analyzer model number you specify will appear in line “F2:” of the program converter screen.

Important!

•Note that the capabilities of the EA-100 and EA-200 are different. Because of this, you should keep in mind that an EA-200 program converted to an EA-100 program and used to perform sampling with an EA-100 setup may not produce the desired results.

20051101