6-2

Using Setup Memory

2.If you are starting from the final Setup Wizard screen, press c(Save Setup-MEM). If you are starting from another screen, press 2(SAVE).

• This displays the screen for inputting the setup name.

3.Input up to 18 characters for the setup name.

4.Press w and then input a memory number (1 to 99).

•If you start from the final Setup Wizard screen (page 2-4), this saves the setup and the message “Complete!” appears. Press w to return to the final Setup Wizard screen (page 2-4).

•If you start from the Advanced Setup menu (page 3-1) or the E-CON2 main menu (page 1-1), this saves the setup and returns to the setup memory list which includes the name you assigned it.

Important!

•Since you assign both a setup name and a file number to each setup, you can assign the same name to multiple setups, if you want.

kUsing and Managing Setups in Setup Memory

All of the setups you save are shown in the setup memory list. After selecting a setup in the list, you can use it to sample data or you can edit it.

uTo preview saved setup data

You can use the following procedure to check the contents of a setup before you use it for sampling.

1.On the E-CON2 main menu (page 1-1), press 2(MEM) to display the setup memory list.

2.Use the f and c cursor keys to highlight the name of the setup you want.

3.Press K(Setup Preview).

• This displays the preview dialog box.

4. To close the preview dialog box, press J.

20070101