Casio FX-9750G, FX-9860GII uTo change the name of setup data, uTo recall a setup and use it for sampling

6-3

Using Setup Memory

uTo recall a setup and use it for sampling

Be sure to perform the following steps before starting sampling with the EA-200.

1.Connect the calculator to the EA-200.

2.Turn on EA-200 power.

3.In accordance with the setup you plan to use, connect the proper sensor to the appropriate EA-200 channel.

4.Prepare the item whose data is to be sampled.

5.On the E-CON2 main menu (page 1-1), press 2(MEM) to display the setup memory list.

6.Use the f and c cursor keys to highlight the name of the setup you want.

7.Press 1(STRT).

8.In response to the confirmation message that appears, press 1.

•Pressing w sets up the EA-200 and then starts sampling.

•To clear the confirmation message without sampling, press 6.

Note

•See “Operations during a sampling operation” on page 8-2 for information about operations you can perform while a sampling operation is in progress.

uTo change the name of setup data

1.On the E-CON2 main menu (page 1-1), press 2(MEM) to display the setup memory list.

2.Use the f and c cursor keys to highlight the name of the setup you want.

3.Press 3(REN).

•This displays the screen for inputting the setup name.

4.Input up to 18 characters for the setup name, and then press w.

• This changes the setup name and returns to the setup memory list.

20070101