uTo replace the existing file with the new version

Press 1(FILE)1(SAVE) to save the currently open file.

uTo save a file under a new name

1. On the eActivity workspace screen, press 1(FILE)2(SV-AS).

• This will display a file name input screen.

2. Input up to 8 characters for the file name and then press w.

•If a file already exists with the same file name you enter in step 2, a message will appear asking if you want to replace the existing file with the new one. Press 1(Yes) to replace the existing file, or 6(No) to cancel the save operation and return to the file name input dialog box in step 2.

Important!

•An eActivity file with the “g2e” file name extension cannot be opened on a calculator running an operating system older than OS Version 2.0.

•Opening an eActivity file with the “g1e” filename extension, inputting functions added with OS Version 2.0 or later, and then saving the file may cause the new save to retain the “g1e” file name extension. Though you will be able to open such a file on a calculator running an operating system older than OS Version 2.0 (since it has the “g1e” file name extension), you will not be able to use the math functions and commands added since OS Version 2.0.

kDisplaying the eActivity Memory Usage Screen

The maximum size of an eActivity file is approximately 30,000 bytes.* You can use the eActivity file memory usage screen to check how much memory capacity remains for the file you are currently working on.

*Actual maximum file size depends on capture memory and clipboard memory usage, and may be less than 30,000 bytes.

uTo display the eActivity memory usage screen

On the workspace screen, press 1(FILE)4(CAPA).

File usage

Remaining file memory capacity

To exit the memory usage screen, press J.

uTo return to the file list from the workspace screen

Press J.

If a confirmation message appears asking if you want to save the current file appears, perform one of the operations described below.

10-12