Casio CTK-7200, WK-7600 manual 100

Using the Song Sequencer

	To adjust the velocity value of a note event			6. Press the R-16 (ENTER) button.
				• This will display the setting screen like the one shown
1. Display the event editor screen of the track you
				below.
	want to edit.
	• See “To select a track for editing” (page E-91).
2. Depending on the type of adjustment you want
	make, perform one of the operations below.
	To adjust this:		Do this:
	Individual note event	On the event editor screen,
		move the cursor to the note
		event you want to adjust and
		then advance to step 3.		• The following explains the meanings and setting ranges
				of the on-screen items. The settings marked with an
	All note events in a track	Advance to step 3.
				asterisk (*) in the “Setting Range” column are initial
	Note events within a	Advance to step 3.
				defaults.
	specific range in a track
				Item name	Description	Setting Range
3. While holding down the R-13 (FUNCTION)				Fix	Specifies a fixed value as the	oFF*, 001 to 127
				(Fixed value)	velocity value.
	button, press the C-17 (MENU) button to display				Select “oFF” for this setting to
					adjust based on the current
	the event editor menu.
					velocity value of each note
4. Use the R-17 (t, y) buttons to move the 0to					event.
				Rate	These settings are enabled	000% to 100%* to
	“VelocityMod.” and then press the R-16			(Velocity Rate)	only when the “oFF” is	200%
	(ENTER) button.				selected for the “Fix” setting.
					They change the velocity
	• This displays the “Velocity Modify” screen.				value of each note event
					according to the mathematical
					expression (decimal parts cut
				Offset	off) shown below. 1 is used	–126 to 000* to
				(Velocity Offset)	when the value produced by	+126
					the expression is less than 1,
					and 127 is used when it is
					greater than 127.
					(Current velocity) X (Rate
					setting) + (Offset setting)
				7. To change the setting to the desired value,
5. Use the dial or R-14 (–, +) buttons to change the				press the R-16 (ENTER) button.
				8. In response to the “Sure?” message that
	mode indicated in the thick brackets (%).
				appears, press the R-14 (YES) button to execute
	To adjust this:		Select this mode:
				the adjustment or the R-14 (NO) button to
	Individual note event		Cursor
				cancel.
	All note events in a track		All
	Note events within a specific range		Locator
	in a track

•While the “Locator” mode is selected, use the R-17 (u, i) buttons, the dial, or the R-14(–, +) buttons to specify the range whose note event velocity value you want to adjust.

E-98