Using the Song Sequencer

3. Press the C-12 (COPY) button.

 

To quantize an individual note event

 

 

•

This displays the “Copy” screen.

 

 

 

 

 

 

1.

Display the event editor screen of the track that

 

•

If you have already specified a range using the locator

 

 

screen (page E-80), that range will be displayed on the

 

 

includes the event you want to quantize.

 

 

range specification screen.

 

 

• See “To select a track for editing” (page E-91).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Use the R-17 (t, y) buttons to move the

 

 

 

 

 

 

 

 

 

cursor to the event you want to quantize.

 

 

 

 

 

 

 

3.

Press the C-13 (QUANTIZE) button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• This displays the “Quantize” screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2Copy destination point

1 Copy source range (start point - end point)

4.Use the R-17 (u, i) buttons to move the cursor, and then use the dial or R-14 (–, +) buttons to change the value at the cursor

position.

4. Use the dial or R-14 (–, +) buttons to change the

 

setting in the thick brackets (%) to “Cursor”.

5.After everything is the way you want, press the

R-16 (ENTER) button.

 

 

5. Specify the note you want to use as the

6. In response to the “Sure?” message that

quantize reference note.

 

 

 

 

To specify this type of

 

Press this button:

appears, press the R-14 (YES) button to copy or

 

note:

 

the R-14 (NO) button to cancel.

 

 

 

 

 

 

Quarter

 

R-3 (2)

•

Pressing the R-14 (YES) button executes the copy

 

 

 

 

Eighth

 

R-7 (6)

 

operation. The message “Complete” appears and the

 

 

 

 

 

 

display returns to the “Copy” screen after the copy is

Sixteenth

 

R-8 (7)

 

complete.

 

 

 

 

 

 

 

 

Thirty-second

 

R-9 (8)

•

At this time, the “2 Copy destination point” value on

 

 

 

 

Triplet*

 

R-10 (,)

 

the locator screen moves forward by the length

 

 

specified by “1 Copy source range”.

 

 

 

 

 

 

 

 

* For a triplet, first select the note and then add the triplet. To

 

 

 

 

 

 

 

 

 

 

 

 

 

 

specify a triplet made up of quarter notes, for example,

 

 

 

 

 

 

 

 

 

1

 

 

2

press the R-3 (2) button and then the R-10 (,) button.

 

 

 

 

 

 

 

6. After everything is the way you want, press the

 

 

 

 

 

 

 

 

018:01:00 020:01:00 024:01:00

026:01:00

 

 

 

 

 

 

 

R-16 (ENTER) button.

 

 

If you want to continue by copying the same copy

• This performs quantization and returns to the event

 

editor screen.

 

 

source range to another location, repeat steps 5 and 6

 

 

 

 

 

 

again.

 

 

 

 

 

7.To return to the event editor screen, press the R-15 (EXIT) button.

E-95