Using the Mixer

• When you move the thick brackets (%) to one of the

Mixer Operationsetting values of a part parameter, all of the part parameter values of the Group (A or B) to which the

To change mixer parameters

part belongs are indicated by level meter black boxes.

1.Press the C-7 (MIXER) button.

 

• This causes the mixer screen to appear.

4. Use the dial or R-14 (–, +) buttons to change the

Currently selected setting

 

 

 

 

 

 

setting value.

(MASTER, DSP, MIC/INST, or A01 to A16/B01 to B16)

 

• Pressing the R-14(–, +) buttons at the same time

 

 

 

 

 

 

 

 

 

 

returns a parameter to its initial default setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• You also can change the settings of parameters using

 

 

 

 

 

 

 

 

 

 

the D-1 (PART/COMMON), D-2 (GROUP A/B), and

 

 

 

 

 

 

 

 

 

 

D-3 (1-8/9-16) buttons, and sliders D-4 (1/9/EXT) to

 

 

 

 

 

 

 

 

 

 

D-12 (MASTER). For more information, see “Using the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sliders to Change Parameter Settings” (page E-38).

 

 

 

 

 

 

 

 

 

 

• While the “Part” (part on/off) setting of a part parameter

 

 

 

 

 

 

 

 

 

 

is being configured, pressing both of the R-14(–, +)

 

 

 

 

 

 

 

 

 

 

buttons at the same time will change the setting to “Sol”

Parameter/Setting value

 

 

 

 

 

 

 

 

 

 

 

 

(Solo). For details, see “Part Parameters” (page E-43).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Currently selected setting part

5. Repeat steps 2 through 4 as required to

 

 

(when currently selected setting is A01 to A16/B01 to B16)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

configure other parameters.

2. Use the R-17 (u, i) buttons to select the

6. To exit the mixer, press the C-7 (MIXER) button

 

mixer parameter you want to change.

 

 

or the R-15 (EXIT) button.

 

• You can select master (MASTER), effect (DSP),

 

 

 

• This exits the mixer screen.

 

 

microphone input (MIC/INST), or a part (A01 through

 

 

 

 

 

 

 

 

A16, B01 through B16). The currently selected setting

 

 

 

 

 

is shown in the line two of the display.

 

 

 

 

 

 

 

 

 

• While master (MASTER), effect (DSP) or microphone input

 

• While a part is selected, you can toggle between Group

 

 

A and Group B by pressing both of the R-17 (u, i)

 

(MIC/INST) is selected in step 2 above for setting, you also

 

 

buttons at the same time.

 

can perform normal keyboard play (play using layer, split,

3. Use the R-17 (t, y) buttons to move the thick

 

and Auto Accompaniment).

• While an individual part (A01 through A16, B01 through

 

brackets (%) to the parameter you want to

 

B16) is selected in step 2 above for setting, pressing a

 

change.

 

 

 

 

 

 

keyboard key will sound only notes of the selected part. All

 

 

 

 

 

 

 

other types of performance operations (layer, split, Auto

 

• The parameters that can be configured depend on the

 

 

 

Accompaniment, etc.) are disabled.

 

 

currently selected setting. For details, refer to the

 

 

 

 

 

 

 

 

sections shown in the table below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When this setting is

 

 

These parameters can be

 

 

 

 

 

selected:

 

 

configured:

 

 

 

MASTER

MASTER Parameters

 

 

 

 

 

 

 

(page E-41)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIC/INST

MIC/INST Parameters

 

 

 

 

 

 

 

(page E-42)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DSP

DSP Parameters (page E-41)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A01 to A16/B01 to B16

Part Parameters (page E-43)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E-37