Using the Tone Editor

 

 

 

Parameter Name

Description

Setting Range

DSP Parameters 1

Shows up to eight parameters for “DSP Type”. *2

*2

through 8

 

 

 

 

 

DSP RevSend

Adjusts how much reverb is applied to the post-DSP note.

0 to 40* to 127

(DSP Reverb Send)

 

 

 

 

 

Mod Setting

Assigns either vibrato or DSP to the S-2 (MODULATION) button.

Vib*, DSP

(Modulation Setting)

 

 

 

 

 

Mod Depth

When vibrato is assigned to the S-2 (MODULATION) button, specifies the

0 to 127 (Default

(Modulation Depth)

depth of vibrato applied to a tone while the button is depressed.

setting depends on

 

 

the tone.)

 

 

 

Mod Button Assign*3

Specifies the function assigned to the S-2 (MODULATION) button when “DSP”

oFF*, 1 to 8*4

(Modulation Button

is selected for the “Mod Setting”. Specifying a value from 1 through 8 assigns

 

Assign)

the corresponding DSP parameter (1 through 8). Nothing is assigned to the

 

 

button when “oFF” is selected for this parameter.

 

 

 

 

Mod Button On Value*3

Specifies how the function currently assigned to the S-2 (MODULATION)

*5

(Modulation Button On

button works while the button is depressed.

 

Value)

 

 

 

 

 

Mod Button Off Value*3

Specifies how the function currently assigned to the S-2 (MODULATION)

*5

(Modulation Button Off

button works while the button is released.

 

Value)

 

 

 

 

 

Rot Button Assign*6

Specifies the function assigned to the D-1 (ROTARY SLOW/FAST) button.

oFF*, 1 to 8*4

(Rotary Button Assign)

Specifying a value from 1 through 8 assigns the corresponding DSP parameter

 

 

(1 through 8). Nothing is assigned to the button when “oFF” is selected for this

 

 

parameter.

 

 

 

 

Rot Button On Value*6

Specifies how the function currently assigned to the D-1 (ROTARY SLOW/

*7

(Rotary Button On Value)

FAST) button works while the button is lit.

 

 

 

 

Rot Button Off Value*6

Specifies how the function currently assigned to the D-1 (ROTARY SLOW/

*7

(Rotary Button Off Value)

FAST) button works while the button is unlit.

 

 

 

 

*1 See “Preset DSP List” (page E-155) for information about the DSP types of each preset DSP.

*2 The number of DSP parameters, their content, and their setting ranges depend on the DSP type. For details, see “DSP Type List” (page E-156) and “DSP Parameter List” (page E-157).

*3 Included in the “Mod Button” group. To change the settings of these parameters, move the 0to “Mod Button” and then press the R-16 (ENTER) button. Next, use the R-17 (t, y) buttons to move the 0 to the parameter whose setting you want to change.

*4 Setting range depends on the selected DSP type.

*5 Depends on the selected DSP type and the “Mod Button Assign” setting.

*6 Included in the “Rot Button” group. To change the settings of these parameters, move the 0to “Rot Button” and then press the R-16 (ENTER) button. Next, use the R-17 (t, y) buttons to move the 0to the parameter whose setting you want to change.

*7 Depends on the selected DSP type and the “Rot Button Assign” setting.

E-49