Casio CTK-7200, WK-7600 manual 41

		Using the Mixer
● Sliders D-4 (1/9/EXT) through D-11 (8/16):		4. Next, to adjust the volumes of parts A09
Allow configuration of the following parameter settings in		through A16, press the D-3 (1-8/9-16) button.
accordance with the currently displayed mixer setting.
When this setting	These parameter settings can be
screen is displayed:	configured:
MASTER Parameters	Slider D-4 (1/9/EXT):
(page E-41),	MIC/INST parameters*
MIC/INST Parameters	Slider D-5 (2/10/DSP):	5. Use sliders D-4 (1/9/EXT) to D-11 (8/16) to adjust
(page E-42),	DSP parameters*
DSP Parameters	Sliders D-6 (3/11) to D-11 (8/16):	the volume of each part (A09 through A16).
(page E-41)	Parameters of part assigned to
	each slider*
Part Parameters	Sliders D-4 (1/9/EXT) to
(page E-43)	D-11 (8/16):
	Parameters of part assigned to
	each slider*

*Operating a slider whose setting does not correspond to anything on the currently displayed setting screen will automatically switch to the setting screen that corresponds to the slider. For example, if you operate slider D-4 (1/9/ EXT) while the master parameter setting screen is displayed, the display will automatically switch to the MIC/ INST parameter setting screen.

●Slider D-12 (MASTER):

Changes the master parameter setting. Operating this slider while any screen other than the master parameter setting screen is displayed will automatically switch to the master parameter setting screen.

■Setting Operation Example: To adjust the volume of parts A01 through A16

1.While the mixer setting screen is displayed, use the R-17 (u, i) buttons to select one of the parts (A01 through A08).

2.Use the R-17 (t, y) buttons to move the 0to “Volume”.

•This enables modification of the part volume setting.

3.Use sliders D-4 (1/9/EXT) to D-11 (8/16) to adjust the volume of each part (A01 through A08).

•As you move a slider to change a part volume, the setting is reflected in the value inside the thick brackets (%) and on the level meter.

E-39