Using the Pattern Sequencer

To copy preset or user rhythm instrument part data to a rec area

•This procedure copies note events only.

•You will not be able to perform this procedure if an INTRO or ENDING is selected as the accompaniment pattern.

•When a percussion part or drum part is specified as the copy destination instrument part, you can specify a percussion part or drum part as the copy source. When a bass part or a chord part (chord 1 through chord 5) is specified as the copy destination, you can specify a bass part or a chord part (chord 1 through chord 5) as the copy source. No other part combinations are allowed.

1.While the pattern sequencer screen is displayed, use the L-13 (NORMAL/FILL-IN) or L-14 (VARIATION/FILL-IN) button to select an accompaniment pattern, and the R-17 (u, i) buttons to select an instrument part.

•The rec area of the accompaniment pattern/instrument part included in the accompaniment pattern is the copy destinations.

2.While holding down the R-13 (FUNCTION) button, press the C-5 (EDIT) button to display the edit menu.

3.Use the R-17 (t, y) buttons to move the 0to “PartEdit” and then press the R-16 (ENTER) button.

•This displays the “Part Edit” screen.

4.Use the R-17 (y) button to move the 0to “Copy” and then press the R-16 (ENTER) button.

•This displays the “Part Copy” screen.

1

5.Specify a rhythm number, accompaniment pattern, and instrument part as the copy destination.

•Use the R-17 (t, y, u, i) buttons to select one of the items described in the table below and then use the dial or R-14(–, +) buttons to change the setting.

Display: Item name

Setting Range

1Copy source rhythm

A:001 to F:100

number

 

 

 

2Copy source

normal (NORMAL),

accompaniment

nrmFil (NORMAL FILL-IN),

pattern

Variat (VARIATION),

 

VarFil (VARIATION FILL-IN)

 

 

3Copy source part

Percus (Percussion),

 

Drum (Drums), Bass (Bass),

 

Chord1 to Chord5 (Chord 1 to

 

Chord 5)

 

 

6.After the settings are the way you want, press the R-16 (ENTER) button.

7.In response to the “Sure?” message that appears, press the R-14 (YES) button to copy or the R-14 (NO) button to cancel.

•The copied instrument part status will become “Recorded Data”.

2 3

E-119