Using the Function Menu

Initialize (Initialize)

This item can be used to initialize all data and settings, or parameter settings only.

For information about what settings are initialized when “Parameter” is selected for initialization in step 4 of the procedure below, see “Parameter List” (page E-162).

To initialize all data and settings (or parameter settings only)

1.Press the R-13 (FUNCTION) button to display the function menu.

2.Use the R-17 (i, y) buttons to move the 0to “General” and then press the R-16 (ENTER) button.

3.Use the R-17 (i, y) buttons to move the 0to “Initialize” and then press the R-16 (ENTER) button.

This displays the initialize screen like the one shown below.

4.Use the R-17 (t, y) buttons to select either “All” (all settings) or “Parameter” (parameter settings only).

5.To execute initialization, press the R-16 (ENTER) button.

E-135