Recording and Playing Audio

4. Press the L-16 (PLAY/STOP) button.

 

■ About center cancel

 

•

This will start playback of the audio file and cause the

 

Center cancel can be used to cut out the vocal part (which is

 

L-16 (PLAY/STOP) button to change from flashing to

 

normally located in the center of the stereo field) from an

 

lit. The time counter also will start counting up.

 

audio file stored to a memory card from your computer. How

•

The following operations are supported during

 

successful center cancel is in cutting out the audio depends

 

playback.

 

 

on the audio file you are playing back.

 

 

 

 

 

Each press of the L-17 (PART SELECT) button toggles

To perform this

Do this:

 

between center cancel and normal (no center cancel)

 

operation:

 

 

 

 

playback. The current setting can be determined by checking

Fast forward

Hold down the L-14 (dFF) button or

 

 

the graphic formed inside the level indicator as shown below.

 

 

rotate the dial to the right.*

 

 

 

 

 

 

 

Status

Playback standby

Playback in

Fast backward

Hold down the L-13 (sREW) button

 

 

progress

 

 

 

 

 

or rotate the dial to the left.*

 

 

 

 

 

 

 

 

 

 

Pause

Press the L-15 (PAUSE) button.

 

 

 

 

 

 

 

 

 

 

Restart paused

Press the L-15 (PAUSE) button.

 

 

 

 

playback

 

 

 

 

 

 

 

 

 

 

 

Lower playback

Press the R-14(–)button, which will

 

Normal

 

 

volume

display a volume setting screen.

 

 

 

 

 

 

Rotating the dial to the left while this

 

 

 

 

 

 

screen is displayed also will lower

 

 

 

 

 

 

playback volume.

 

 

 

 

 

 

 

 

 

 

Raise playback

Press the R-14 (+) button, which will

 

 

 

 

 

 

 

 

volume

display a volume setting screen.

 

 

 

 

 

 

Rotating the dial to the right while this

 

 

 

 

 

 

screen is displayed also will raise

 

 

 

 

 

 

playback volume.

 

 

 

 

 

 

 

 

 

 

Center cancel

Press the L-17 (PART SELECT)

 

Center cancel

 

 

 

 

button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Dial operation is supported only while the audio play screen is displayed.

•Playback stops automatically when it reaches the end of a song. To stop playback part way through, press the L-16 (PLAY/STOP) button.

5. To exit the audio play mode, press the C-6

 

 

 

 

 

 

 

 

 

 

 

 

• When the MIC/INST parameter (page E-42) “Pan” setting is

 

 

(AUDIO PLAY) button.

 

“0” (initial default value), center cancel is applied to all

 

 

• This returns to the mode screen (rhythm mode or song

 

sound recorded from an external device connected to the

 

 

sequencer mode) that was displayed before you

 

T-6 (MIC IN) jack or the T-4 (INST IN) jack.

 

 

performed step 1 of this procedure.

 

 

 

 

 

 

 

 

 

 

 

•During audio record standby, you can exit the audio play mode by pressing the R-15 (EXIT) button.

•During the above operation, you can press the C-6 (AUDIO PLAY) button to exit the audio play mode.

E-127