Using the Mixer

Using the Sliders to Change Parameter Settings

While the mixer screen is displayed, use sliders D-1 (PART/COMMON), D-2 (GROUP A/B) and (1/9/EXT) to D-11 (8/16).

D-4 (1/9/EXT) to D-12 (MASTER) to change the displayed parameter settings. The D-3(1-8/9-16)buttons are used to specify the parts that correspond to sliders D-4

D-1 D-2 D-3 D-4 D-5 D-6 D-7 D-8 D-9 D-10 D-11 D-12

The following describes the operation of these buttons and sliders while the mixer screen is displayed.

●D-1 (PART/COMMON) button:

Each press toggles the mixer screen between master parameter settings (MASTER) and the settings of one of the part (A01 through A16, B01 through B16) parameters.

●D-2 (GROUP A/B) button:

Each press toggles the part parameter setting screen between one of the parts in group L(A01 through A16) and one of the parts in group M(B01 through B16).

●D-3 (1-8/9-16) button:

Each press toggles the parts that correspond to parameter operations by sliders D-4 (1/9/EXT) to D-11 (8/16) between A01 through A08 (or B01 through B08) and A09 through A16 (or B09 through B16).

E-38