Selecting and Playing a Tone

5. When you are finished, press the R-15 (EXIT)

 

5. When you are finished making adjustments,

 

button twice.

 

press the R-15 (EXIT) button twice.

 

 

• This will return to the screen that was displayed before

 

• This will return to the screen that was displayed before

 

 

you displayed the scale screen.

 

you displayed the scale screen.

 

 

 

 

 

 

 

 

 

Specifying whether the Current Scale

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The root note setting you specify here is retained, even if

 

Settings Should be Applied to Auto

 

you later change to a different preset temperament.

 

Accompaniment (Accomp Scale)

 

 

 

 

 

 

 

 

 

 

Fine Tuning a Scale

 

1. While holding down the R-13 (FUNCTION)

 

 

1. If required, perform the procedure under “To

 

button, press the C-8 (SCALE) button to display

 

the scale screen.

 

select a preset scale” (page E-21) to select a

 

 

 

 

 

preset temperament.

 

2. Use the R-17 (i) button to move the 0to

2. While holding down the R-13 (FUNCTION)

 

“AcmpScale”.

 

 

 

button, press the C-8 (SCALE) button to display

 

 

 

the scale screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Use the R-17 (y) button to move the 0to

3. Use the dial or the R-14 (–, +) buttons to change

“FineTune” and then press the R-16 (ENTER)

the setting value.

 

 

 

 

button.

 

To do this:

Select this setting:

• This displays the scale fine tuning screen like the one

Not apply scale settings to Auto

oFF

shown below.

Accompaniment

 

 

 

 

 

 

 

Apply scale settings to Auto

on

 

Accompaniment

 

 

 

 

 

4. When the setting is the way you want, press the

 

R-15 (EXIT) button.

 

 

• This will return to the screen that was displayed before

 

you displayed the scale screen.

4. You can adjust the tuning of each individual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The above scale on/off setting affects the Auto

note in the scale.

Accompaniment bass part and Chord 1 through Chord 5

parts (A11 through A16). You also can turn scales settings

(1) Use the R-17 (t) button to move the 0to “Note”, and

on or off for each individual part using the Part Parameter

then use the dial or R-14(–, +) buttons to select the

(page E-43) “Scale (Part Scale Enable)” setting.

name of the note you want to fine tune.

 

 

 

• You can also press a keyboard key to specify a

 

 

 

note.

 

 

 

(2) Use the R-17 (y) button to move the 0to “Cent”, and

 

 

 

then use the dial or R-14(–, +) buttons to fine tune the

 

 

 

selected note. You can fine tune a note within the

 

 

 

range of –99 through +99 cents.

 

 

 

• Adjusting all of the notes in the scale to 0 changes

 

 

 

the selected tuning to equal temperament. The

 

 

 

Cindicator will be on the display when any note

 

 

 

in the scale has a value other than 0.

 

 

 

E-22