Casio CTK-7200, WK-7600 Connecting to a Computer

E-145

http://world.casio.com/

• Once you are able to connect successfully for the first time, there is no problem with leaving the USB cable connected when you turn off your computer and/or Digital Keyboard.

• You can alter the Digital Keyboard’s MIDI setup by changing the MIDI data send channel or other settings. For details, see “MIDI Group” under “Function Menu Settings” (page E-131).

• For information about the relationship between each Digital Keyboard part (page E-36) and the MIDI IN and MIDI OUT channels, see “Assigning a MIDI Channel to Each Part” (page E-161).

• This Digital Keyboard conforms to General MIDI Level 1 (GM).

• For detailed specifications and connections that apply to MIDI data send and receive by this Digital Keyboard, see the latest support information provided by the website at the following URL.

Computer USB port

Digital Keyboard USB jack

B connector

Connecting to a Computer

You can connect the Digital Keyboard to a computer and			2. After starting up your computer, use a
exchange MIDI data between them. You can send play data				commercially available USB cable to connect it
from the Digital Keyboard to music software running on your				to the Digital Keyboard.
computer, or you can send MIDI data from your computer to
the Digital Keyboard for playback.
	Minimum Computer System						USB cable
							(A-B type)
	Requirements					A connector
The following shows the minimum computer system
requirements for sending and receiving MIDI data. Check to
make sure that your computer complies with these
requirements before connecting the Digital Keyboard to it.
• Operating System
			3. Turn on the Digital Keyboard.
	Windows® XP (SP2 or later) *1
	Windows Vista® *2			• If this is the first time you are connecting the Digital
	Windows® 7 *3				Keyboard to your computer, the driver software
	Mac OS® X (10.3.9, 10.4.11, 10.5.X, 10.6.X, 10.7.X)				required to send and receive data will be installed on
	*1: Windows XP Home Edition				your computer automatically.
		Windows XP Professional (32-bit)	4. Start up your computer’s music software.
	*2: Windows Vista (32-bit)
	*3: Windows 7 (32-bit, 64-bit)		5. Configure the music software settings to select
• USB port				one of the following as the MIDI device.
				CASIO USB-MIDI : (For Windows 7, Windows Vista,
								Mac OS X)
• Never connect to a computer that does not conform to				USB Audio Device : (For Windows XP)
				• For information about how to select the MIDI device,
	the above requirements. Doing so can cause problems
					see the user documentation that comes with the music
	with your computer.
					software you are using.
	Connecting the Digital Keyboard to Your
	Computer
			• Be sure to turn on the Digital Keyboard first before
				starting up your computer’s music software.
• Make sure you follow the steps of the procedure below
	exactly. Connecting incorrectly can make data send
	and receive impossible.
1. Turn off the Digital Keyboard and then start up
	your computer.
	• Do not start up the music software on your computer
		yet!