Reference

 

 

 

 

 

Symptom

 

Action

 

Notes keep sounding, without stopping.

•

Turn power off and then back on to initialize all Digital Keyboard settings (page

 

 

 

E-13).

 

 

• Replace the batteries with new ones or switch over to AC adaptor power (page

 

 

 

E-9).

 

 

 

 

Some notes are cut off while they are

Notes are cut off whenever the number of notes being sounded exceeds the

 

playing.

maximum polyphony value of 64 (21 to 32 for some tones). This does not indicate

 

 

malfunction.

 

 

 

 

 

The volume or tone setting I configured

•

Adjust the volume setting (page E-13).

 

has changed.

•

Turn power off and then back on to initialize all Digital Keyboard settings (page

 

 

 

E-13).

 

 

• Replace the batteries with new ones or switch over to AC adaptor power (page

 

 

 

E-9).

 

 

 

 

Output volume does not change even

• Change the Touch Response setting (page E-131).

 

though I change my keyboard pressure.

•

Turn power off and then back on to initialize all Digital Keyboard settings (page

 

 

 

E-13).

 

 

 

 

In certain keyboard ranges, the volume

This is due to system limitations. It does not indicate malfunction.

 

and tone quality sound are slightly

 

 

 

different from those in other keyboard

 

 

 

ranges.

 

 

 

 

 

 

With some tones, octaves do not change

This is due to system limitations. It does not indicate malfunction.

 

at the far ends of the keyboard.

 

 

 

 

 

 

 

The pitch of the notes does not match

•

When the B indicator is displayed, it means that the transpose setting

 

other accompanying instruments or

 

(page E-18) has been used to change the pitch of the keyboard. Return the

 

sounds strange when played along with

 

transpose setting to 00.

 

other instruments.

•

When the C indicator is displayed, it means that the scale setting (page

 

 

 

E-21) has been used to change the Digital Keyboard’s initial default setting. Use

 

 

 

the procedure under “To select a preset scale” (page E-21) to change to the

 

 

 

“Equal” preset scale.

 

 

•

Turn power off and then back on to initialize all Digital Keyboard settings (page

 

 

 

E-13).

 

 

 

 

The reverb of notes seems to change

• Check and adjust the reverb setting (page E-31).

 

suddenly.

•

Turn power off and then back on to initialize all Digital Keyboard settings (page

 

 

 

E-13).

Operation

 

 

 

Tone, rhythm, and other settings revert to

The Digital Keyboard may be configured to restore default settings (factory default

 

their initial defaults whenever you turn on

settings or settings registered by you) when power is turned on. If you want the

 

the Digital Keyboard.

Digital Keyboard to remember its last setup and restore it the next time it is turned

 

 

on, select “on” for the Auto Resume setting (page E-134).

Computer Connection

 

 

 

I can’t exchange data between the Digital

• Check to make sure that the USB cable is connected to the Digital Keyboard and

 

Keyboard and a computer.

 

computer, and that the device is selected correctly with your computer’s music

 

 

 

software settings (page E-145).

 

 

•

Turn off the Digital Keyboard and then exit the music software on your computer.

 

 

 

Next, turn the Digital Keyboard back on and then restart the music software on

 

 

 

your computer.

 

 

 

 

E-151