Using the Function Menu

4. To exit the function menu, press the R-13

 

Performance (Performance/Accompaniment)

 

(FUNCTION) button or R-15 (EXIT) button.

 

 

Group

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Note that all function menu settings you configure are

 

 

 

 

 

 

• You can directly display this group screen without going

returned to their initial defaults whenever you turn off

 

through the function menu. While the initial power on

the Digital Keyboard. You can configure the Digital

 

screen is displayed, hold down the R-13 (FUNCTION)

Keyboard so it remembers its latest settings or to apply

 

button as you press the C-17 (MENU) button.

predetermined default settings each time you turn it on.

 

 

 

For details, see “AutoResume (Auto Resume)” (page

 

 

 

E-134) and “Default (Default Settings)” (page E-134).

 

 

 

•Some function menu settings also can be saved to registration memory. For details, see “Saving Keyboard Setups to Registration Memory” (page E-66).

 

Function Menu Settings

 

 

 

This section explains the meaning of each function menu

 

 

 

setting item, and provides information about setting ranges

 

 

 

 

Touch (Touch Response)

and initial default values.

 

• For each item, the initial default setting is indicated by an

 

Select one of the settings below to specify the relationship

 

asterisk (*).

 

between key pressure and note volume.

 

Tune (Tuning)

 

oFF : Constant note volume regardless of keyboard pressure

 

1*

: Normal

Fine tunes the overall keyboard tuning in 0.1 Hz steps.

 

2 : Strong sound even with light pressure

 

 

 

A4=415.5 - 440.0* - 465.9 Hz

 

 

 

 

TchOffVel (Touch Off Velocity)

 

 

 

 

 

 

 

 

 

 

 

 

Specifies the velocity value setting when the Touch setting is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

off.

 

• Changing the tuning value does not affect audio playback

 

 

 

(page E-126).

000 - 100* - 127

 

 

 

 

 

 

EQ (Equalizer)

 

Ped.Setting (Pedal Setting)

 

 

 

 

 

 

 

 

 

One of five presets can be selected to change the overall

 

■ Ped.Assign (Pedal Assign)

frequency characteristics of the sound.

 

Specifies the operation of the pedal connected to T-3

 

 

 

 

 

 

oFF*

:Equalizer off

 

(SUSTAIN/ASSIGNABLE JACK).

Soft

:Suppressed high tones for a softer sound

 

SUS* : Sustain pedal

 

SSt

: Sostenuto pedal

Bright :Enhanced high tones for a brighter sound

 

 

SFt

: Soft pedal

B.Boost :Enhanced low tones (Bass Boost)

 

 

rHy : Rhythm start/stop switch

Powerful :Enhanced volume

 

 

 

 

 

 

 

 

 

 

■ Upper1, Upper2, Lower, A.HAR.

 

 

 

 

 

 

These settings specially on* (effect applied) or oFF (effect not

 

 

 

 

 

 

applied) for the UPPER 1, UPPER 2, LOWER, and Auto

 

 

 

 

 

 

Harmonize parts for the operation currently assigned to the

 

 

 

 

 

 

pedal.

 

 

 

 

 

 

Upper1 : UPPER 1

 

 

 

 

 

 

Upper2 : UPPER 2

 

 

 

 

 

 

Lower : LOWER

 

 

 

Lights

 

A.HAR. : Auto Harmonize

 

 

 

 

 

 

• When the Pedal Assign setting is “rHy”, the on/off settings

 

 

 

 

 

 

of these parts are disabled, and the pedal functions as a

 

 

 

 

 

 

rhythm start/stop switch.

E-131