Using a Memory Card

5. Press the R-17 (y) button to change to the

 

 

 

“Xxxx Save”*1 screen.

 

 

 

 

 

 

 

 

 

• Performing the above procedure to write a song sequencer

 

 

 

song to an SMF format file will save the data as SMF

 

 

Format 0 (16 channel) data. System track data A01 through

 

 

A16 are saved respectively to SMF 01CH through 16CH,

 

 

while song tracks 01 through 16 are saved respectively to

 

 

SMF 01CH through 16CH. Note that the save operation

 

 

gives priority to the data of tracks 01 through 16. If there is

 

 

data in any of the tracks 01 through 16 and “on” is selected

 

 

for the “Part” (part on/off) setting of a track that contains

 

 

data, the system track data (A01 through A16) for the same

• To save a song sequencer song in SMF format, press

 

numbered track data will not be saved. Also, the note

 

events of tracks that are turned off using the mixer are not

the R-17 (y) button one more time here to display the

 

 

saved.

“Seq SmfSave” screen. You can switch between the

 

 

 

 

“Xxxx Load”, “Seq Save”, and “Seq SmfSave” screens

 

To batch save all Digital Keyboard data to a

using the R-17 (t, y) buttons.

 

 

memory card

 

 

6.Enter the file name to assign to the data when it

is stored.

 

 

 

 

 

 

 

 

 

 

1.

Press the C-9 (CARD) button to enter the card

Change the initial default file name “USERNAME.xxx”*2

 

mode.

as described below.

 

 

 

 

 

 

 

 

2.

While holding down the R-13 (FUNCTION)

(1) Use the R-17 (u, i) buttons to move the cursor to

 

the character you want to change.

 

 

 

 

 

button, press the C-17 (MENU) button.

(2) Use the dial or the R-14(–, +) buttons to change the

 

• This displays the function menu “Play/CardUtl” screen.

 

character.

 

 

 

 

 

 

 

 

 

3.

 

• The characters you can select are shown below.

Use the R-17 (t, y) buttons to move the 0to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“AllData” and then press the R-16 (ENTER)

 

0

1

2

3

4

5

6

 

7

8

9

 

 

button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

B

C

D

E

F

G

 

H

I

J

 

4.

When the “All Load” screen appears, use the

 

K

L

M

N

O

P

Q

 

R

S

T

 

 

 

 

 

R-17 (y) button to change to the “All Save”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

U

V

W

X

Y

Z

S

 

&

_

'

 

 

screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(

)

-

^

{

}

@

 

~

`

 

 

 

 

7.After everything is the way you want, press the R-16 (ENTER) button.

8.In response to the “Sure?” message that appears, press the R-14 (YES) button to save or the R-14 (NO) button to cancel.

*1

The “Xxxx” part of the file name depends the type of

• The remainder of the steps are the same as those from

step 6 under “To save Digital Keyboard data to a

 

data you are saving.

 

memory card” (page E-138).

*2

The “xxx” part of the file name is a file name extension

 

 

that depends the type of data you are saving.

 

E-139