Applying Effects to a Sound

DSP Parameter Settings

The table below shows the parameters that can be configured on the DSP editor screen.

The settings marked with an asterisk (*) in the “Setting Range” column are initial defaults.

Parameter Name

Description

Setting Range

Parameters 1 through 8

The number of parameters and settings available for each parameter

–

 

depends on the DSP type. For details, see “DSP Parameter List” (page

 

 

E-157).

 

 

 

 

DSP RevSend

Specifies how much of the post-DSP sound should be sent to reverb.

0 - 40* - 127

(DSP Reverb Send)

 

 

 

 

 

Mod Button Assign*1

Specifies the function assigned to the S-2 (MODULATION) button when

oFF*, 1 - 8*2

(Modulation Button Assign)

“DSP” is selected for the “Mod Setting” tone parameter (page E-49).

 

 

Specifying a value from 1 through 8 assigns the corresponding DSP

 

 

parameter (1 through 8). Nothing is assigned to the button when “oFF” is

 

 

selected for this parameter.

 

 

 

 

Mod Button On Value*1

Specifies how the function currently assigned to the S-2

*3

(Modulation Button On Value)

(MODULATION) button works while the button is depressed.

 

 

 

 

Mod Button Off Value*1

Specifies how the function currently assigned to the S-2

*3

(Modulation Button Off Value)

(MODULATION) button works while the button is released.

 

 

 

 

Rot Button Assign*4

Specifies the function assigned to the D-1 (ROTARY SLOW/FAST)

oFF*, 1 - 8*2

(Rotary Button Assign)

button.

 

 

Specifying a value from 1 through 8 assigns the corresponding DSP

 

 

parameter (1 through 8). Nothing is assigned to the button when “oFF” is

 

 

selected for this parameter.

 

 

 

 

Rot Button On Value*4

Specifies how the function currently assigned to the D-1 (ROTARY

*5

(Rotary Button On Value)

SLOW/FAST) button works while the button is lit.

 

 

 

 

Rot Button Off Value*4

Specifies how the function currently assigned to the D-1 (ROTARY

*5

(Rotary Button Off Value)

SLOW/FAST) button works while the button is unlit.

 

 

 

 

*1 Included in the “Mod Button” group. To change the settings of these parameters, move the 0to “Mod Button” and then press the R-16 (ENTER) button. Next, use the R-17 (t, y) buttons to move the 0 to the parameter whose setting you want to change.

*2 Setting range depends on the selected DSP type.

*3 Depends on the selected DSP type and the “Mod Button Assign” setting.

*4 Included in the “Rot Button” group. To change the settings of these parameters, move the 0to “Rot Button” and then press the R-16 (ENTER) button. Next, use the R-17 (t, y) buttons to move the 0 to the parameter whose setting you want to change.

*5 Depends on the selected DSP type and the “Rot Button Assign” setting.

E-35