Reference
08: Flanger
Applies wildly pulsating and metallic reverberation to sounds. LFO waveform is selectable.
Parameters and Value Ranges:
1:LFO Rate (0 to 127) Adjusts the LFO rate.
2:LFO Depth (0 to 127) Adjusts the LFO depth.
3:LFO Waveform (sin, tri, random) Selects the LFO waveform.
4:Feedback (0 to 127)
Adjusts the strength of feedback.
09: Chorus
Gives sounds depth and breadth. Chorus type is selectable.
Parameters and Value Ranges:
1:LFO Rate (0 to 127) Adjusts the LFO rate.
2:LFO Depth (0 to 127) Adjusts the LFO depth.
3:LFO Waveform (sin, tri) Selects the LFO waveform.
4:Feedback (0 to 127)
Adjusts the strength of feedback
5:Type (mono, stereo, tri) Selects the chorus type.
10: Delay
Delays the input signal and feeds it back to create a repeating effect and give sounds more breadth.
Parameters and Value Ranges:
1:Delay Time (0 to 127) Adjusts the delay time.
2:Feedback (0 to 127)
Adjusts the repeat of the delay.
3 :Ratio Lch (0 to 127)
Adjusts the delay time of the left channel. This value is a ratio of the value specified for Delay Time.
4 :Ratio Rch (0 to 127)
Adjusts the delay time of the right channel. This value is a ratio of the value specified for Delay Time.
5 :Wet Level (0, 1, 2, 3, 4, 5)
Adjusts the level of the delay sound.
6 :Type (1, 2)
Selects the delay type.
1:Delay repeat determined by Delay Time.
2:Delay repeat determined by Delay Time and Ratio L/R.
Important!
When adjusting the delay time and type, certain settings can result in a switching sound in the delay.
11: Reflection
An effector that extracts early reflections from reverb. Applies acoustic presence to sounds.
Parameters and Value Ranges:
1 :Type (1, 2, 3, 4, 5, 6, 7, 8)
Selects from among the eight available reflection patterns.
2 :Feedback (0 to 127)
Adjusts the repeat of the reflected sound.
12: Rotary
This is a rotary speaker simulator.
Parameters and Value Ranges:
1:Overdrive Gain (0, 1, 2, 3) Adjusts overdrive gain.
2:Overdrive Level (0 to 127) Adjusts the overdrive output level.
3:Speed (Slow, Fast)
Switches the speed mode between fast and slow.
4:Brake (Rotate, Stop) Stops speaker rotation.
5:Fall Acceleration (0 to 127)
Adjusts acceleration when the speed mode is switched from fast to slow.
6 :Rise Acceleration (0 to 127)
Adjusts acceleration when the speed mode is switched from slow to fast.
7 :Slow Rate (0 to 127)
Adjusts the speaker rotation speed in the slow speed mode.
8 :Fast Rate (0 to 127)
Adjusts the speaker rotation speed in the fast speed mode.
13: Ring Modulator
Multiplies the input signal with an internal oscillator signal to create a metallic sound.
Parameters and Value Ranges:
1 :OSC Frequency (0 to 127)
Sets the reference frequency of the internal oscillator.
2:LFO Rate (0 to 127) Adjusts the LFO rate.
3:LFO Depth (0 to 127) Adjusts the LFO depth.
4:Type (1, 2, 3)
1:Outputs the ring modulated signal only.
2:Outputs the ring modulated signal and the input signal.
3:Outputs a signal with a chorus effect applied to 2 (ring modulated signal and input signal).